- What is the Water Area?
- What is the Population Count?
- What is the Population Density?
- What is the Percent who did not finish the 9th grade?
- What is the Student Teacher Ratio?
- What is the Median Earnings?
- What is the Mean Job Proximity Index?
- What is the Number of Employees?
- What is the Percent Without Health Insurance?
- What is the Mean Environmental Health Hazard Index?
The land area of Broward County, FL was 1,210 in 2018.
Land area is a measurement providing the size, in square miles, of the land portions of geographic entities for which the Census Bureau tabulates and disseminates data. Area is calculated from the specific boundary recorded for each entity in the Census Bureau's geographic database. Land area is based on current information in the TIGER® data base, calculated for use with Census 2010.
Water Area figures include inland, coastal, Great Lakes, and territorial sea water. Inland water consists of any lake, reservoir, pond, or similar body of water that is recorded in the Census Bureau's geographic database. It also includes any river, creek, canal, stream, or similar feature that is recorded in that database as a two- dimensional feature (rather than as a single line). The portions of the oceans and related large embayments (such as Chesapeake Bay and Puget Sound), the Gulf of Mexico, and the Caribbean Sea that belong to the United States and its territories are classified as coastal and territorial waters; the Great Lakes are treated as a separate water entity. Rivers and bays that empty into these bodies of water are treated as inland water from the point beyond which they are narrower than 1 nautical mile across. Identification of land and inland, coastal, territorial, and Great Lakes waters is for data presentation purposes only and does not necessarily reflect their legal definitions.
Geographic and Area Datasets Involving Broward County, FL
- API data.cityofgainesville.org | Last Updated 2020-03-16T18:09:33.000Z
Monthly reclaimed water consumption in Kilo-gallons (kgals) by service address for all customers in the GRU Service Area. Reclaimed water is also known as sewer or wastewater. (Potable water use can be found in another dataset)
- API data.ny.gov | Last Updated 2019-10-17T22:02:17.000Z
The dataset represents the lakes participating in the Citizen Statewide Lake Monitoring Assessment Program (CSLAP). CSLAP is a volunteer lake monitoring and education program that is managed by DEC and New York State Federation of Lake Associations (NYSFOLA). The data collected through the program is used to identify water quality issues, detect seasonal and long term patterns, and inform volunteers and lake residents about water quality conditions in their lake. The program has delivered high quality data to many DEC programs for over 25 years.The dataset catalogs CSLAP lake information; including: lake name, lake depth, public accessibility, trophic status, watershed area, elevation, lake area, water quality classification, county, town, CSLAP status, years sampled, and last year sampled.
- API data.wa.gov | Last Updated 2016-08-09T16:23:33.000Z
Population and housing information extracted from decennial census Public Law 94-171 redistricting summary files for Washington state for years 2000 and 2010.
- API data.colorado.gov | Last Updated 2020-04-01T06:03:40.000Z
A Jurisdictional Dam is a dam creating a reservoir with a capacity of more than 100 acre-feet, or creates a reservoir with a surface area in excess of 20 acres at the high-water line, or exceeds 10 feet in height measured vertically from the elevation of the lowest point of the natural surface of the ground where that point occurs along the longitudinal centerline of the dam up to the crest of the emergency spillway of the dam. For reservoirs created by excavation, or where the invert of the outlet conduit is placed below the surface of the natural ground at its lowest point beneath the dam, the jurisdictional height shall be measured from the invert of the outlet at the longitudinal centerline of the embankment or from the bottom of the excavation at the longitudinal centerline of the dam, whichever is greatest. Jurisdictional height is defined in Rule 4.2.19. The State Engineer shall have final authority over determination of the jurisdictional height of the dam.
- API datahub.smcgov.org | Last Updated 2020-03-21T01:00:14.000Z
Water samples from natural recreational waters in San Mateo County are sampled each week for concentrations of indicator bacteria including E. Coli, Enterococcus, and Coliform bacteria. If concentrations of indicator bacteria exceed State or County standards, the area is posted to warn users that they may become ill if they engage in water contact activities in the posted area. More information about results and testing can be found on the San Mateo County Health System site: http://smchealth.org/environ/beaches This dataset contains readings from January, 2012 to the present and is updated weekly.
- API data.kingcounty.gov | Last Updated 2020-03-31T22:55:11.000Z
Master calendar for King County
- API data.mo.gov | Last Updated 2019-02-15T19:50:21.000Z
- API data.nashville.gov | Last Updated 2020-04-01T08:05:06.000Z
A listing of the location and status of current known water service outages within the Metro Water Services coverage area.
- API opendata.maryland.gov | Last Updated 2018-08-13T20:15:11.000Z
This is the 2014 Integrated Report. EPA approved this submission in accordance with Sections 303(d), 305(b), and 314(l) of the Clean Water Act, on October 16, 2015. The Integrated Report (IR) combines two water quality reports required under sections 305(b) and 303(d) of the federal Clean Water Act. Section 305(b) requires states, territories and authorized tribes to perform annual water quality assessments to determine the status of jurisdictional waters. Section 303(d) requires states, territories and authorized tribes to identify waters assessed as not meeting water quality standards(see Code of Maryland Regulations 26.08.02). Waters that do not meet standards may require a Total Maximum Daily Load to determine the maximum amount of an impairing substance or pollutant that a particular water body can assimilate and still meet water quality criteria. Historically, the 303(d) List and the 305(b) report were submitted to the Environmental Protection Agency (EPA) as separate documents but more recent guidance has called for combining these two reports into a single biennial publication. More information is available at http://www.mde.state.md.us/PROGRAMS/WATER/TMDL/INTEGRATED303DREPORTS/Pages/Programs/WaterPrograms/TMDL/Maryland%20303%20dlist/index.aspx A searchable version of this data is available at http://www.mde.state.md.us/programs/Water/TMDL/Integrated303dReports/Pages/303d.aspx
- API data.colorado.gov | Last Updated 2020-04-01T06:02:08.000Z
A Non-Jurisdictional Dam is a dam creating a reservoir with a capacity of 100 acre-feet or less and a surface area of 20 acres or less and with a height measured as defined in Rules 188.8.131.52 and 4.2.19 of 10 feet or less. Non-jurisdictional size dams are regulated and subject to the authority of the State Engineer consistent with sections 37- 87-102 and 37-87-105 C.R.S.