- What is the Population Count?
- What is the Population Density?
- What is the Land Area?
- What is the Percent who did not finish the 9th grade?
- What is the Student Teacher Ratio?
- What is the Median Earnings?
- What is the Mean Job Proximity Index?
- What is the Number of Employees?
- What is the Percent Without Health Insurance?
- What is the Mean Environmental Health Hazard Index?
The population rate of change of Boundary County, ID was 2.00% in 2018.
Above charts are based on data from the U.S. Census American Community Survey | ODN Dataset | API -
Demographics and Population Datasets Involving Boundary County, ID
WAOFM - Census - Population and Housing, 2000 and 2010data.wa.gov | Last Updated 2021-09-01T17:20:31.000Z
Population and housing information extracted from decennial census Public Law 94-171 redistricting summary files for Washington state for years 2000 and 2010.
Population Health Measures: Age-Adjusted Mortality Ratesdata.montgomerycountymd.gov | Last Updated 2023-04-03T23:57:01.000Z
Age-adjustment mortality rates are rates of deaths that are computed using a statistical method to create a metric based on the true death rate so that it can be compared over time for a single population (i.e. comparing 2006-2008 to 2010-2012), as well as enable comparisons across different populations with possibly different age distributions in their populations (i.e. comparing Hispanic residents to Asian residents). Age adjustment methods applied to Montgomery County rates are consistent with US Centers for Disease Control and Prevention (CDC), National Center for Health Statistics (NCHS) as well as Maryland Department of Health and Mental Hygiene’s Vital Statistics Administration (DHMH VSA). PHS Planning and Epidemiology receives an annual data file of Montgomery County resident deaths registered with Maryland Department of Health and Mental Hygiene’s Vital Statistics Administration (DHMH VSA). Using SAS analytic software, MCDHHS standardizes, aggregates, and calculates age-adjusted rates for each of the leading causes of death category consistent with state and national methods and by subgroups based on age, gender, race, and ethnicity combinations. Data are released in compliance with Data Use Agreements between DHMH VSA and MCDHHS. This dataset will be updated Annually.
Veteran Population Projection Model 2016 (VetPop2016)data.michigan.gov | Last Updated 2019-12-06T19:24:54.000Z
2015-2045. Veteran population projections by county for US counties. From va.gov: "The Veteran Population Projection Model 2016 (VetPop2016) provides the latest official Veteran population projection from the Department of Veterans Affairs (VA). VetPop2016 is a deterministic actuarial projection model developed by the office of Predictive Analytics and Actuary (PAA) to estimate and project the Veteran Population from Fiscal Year (FY) 2015 to FY2045. Using the best available Veteran data at the end of FY2015 as the base population. VetPop2016 projects living and deceased Veteran counts by key demographic characteristics such as age, gender, period of service, and race/ethnicity at various geographic levels for the next 30 years." ***NOTE: Current upload to data.mi excludes location information for Puerto Rico, American Samoa, Guam, Northern Mariana Islands, Virgin Islands, and Foreign Countries projections. This is because of a geocoding error between the VetPop2016 and the county location file from the US Census Bureau. Point locations for the above mentioned geographies will be added to this dataset once the error is resolved.
Bronx Zip Population and Densitybronx.lehman.cuny.edu | Last Updated 2012-10-21T14:06:17.000Z
2010 Census Data on population, pop density, age and ethnicity per zip code
COVID-19 Vaccinations by Town - ARCHIVEdata.ct.gov | Last Updated 2022-08-18T20:47:48.000Z
NOTE: As of 4/15/2021, this dataset will no longer be updated and will be replaced by two new datasets: 1) "COVID-19 Vaccinations by Town" (https://data.ct.gov/Health-and-Human-Services/COVID-19-Vaccinations-by-Town/x7by-h8k4) and "COVID-19 Vaccinations by Town and Age Group" (https://data.ct.gov/Health-and-Human-Services/COVID-19-Vaccinations-by-Town-and-Age-Group/gngw-ukpw). A summary of COVID-19 vaccination coverage in Connecticut by town. Records without an address could not be included in town vaccine coverage estimates. Total population estimates are based on 2019 data. A person who has received one dose of any vaccine is considered to have received at least one dose. A person is considered fully vaccinated if they have received 2 doses of the Pfizer or Moderna vaccines or 1 dose of the Johnson & Johnson vaccine. The fully vaccinated are a subset of the number who have received at least one dose. The number with At Least One Dose and the number Fully Vaccinated add up to more than the total number of doses because people who received the Johnson & Johnson vaccine fit into both categories. SVI refers to the CDC's Social Vulnerability Index - a measure that combines 15 demographic variables to identify communities most vulnerable to negative health impacts from disasters and public health crises. Measures of social vulnerability include socioeconomic status, household composition, disability, race, ethnicity, language, and transportation limitations - among others. Towns with a "yes" in the "Has SVI tract >0.75" field are those that have at least one census tract that is in the top quartile of vulnerability (e.g., a high-need area). 34 towns in Connecticut have at least one census tract in the top quartile for vulnerability. All data in this report are preliminary; data for previous dates will be updated as new reports are received and data errors are corrected.
Vaccine Hesitancy for COVID-19: County and local estimatesdata.cdc.gov | Last Updated 2021-06-17T20:27:47.000Z
Due to the change in the survey instrument regarding intention to vaccinate, our estimates for “hesitant or unsure” or “hesitant” derived from April 14-26, 2021, are not directly comparable with prior Household Pulse Survey data and should not be used to examine trends in hesitancy. To support state and local communication and outreach efforts, ASPE developed state, county, and sub-state level predictions of hesitancy rates (https://aspe.hhs.gov/pdf-report/vaccine-hesitancy) using the most recently available federal survey data. We estimate hesitancy rates at the state level using the U.S. Census Bureau’s Household Pulse Survey (HPS) (https://www.census.gov/programs-surveys/household-pulse-survey.html) data and utilize the estimated values to predict hesitancy rates at the Public Use Microdata Areas (PUMA) level using the Census Bureau’s 2019 American Community Survey (ACS) 1-year Public Use Microdata Sample (PUMS)(https://www.census.gov/programs-surveys/acs/microdata.html). To create county-level estimates, we used a PUMA-to-county crosswalk from the Missouri Census Data Center(https://mcdc.missouri.edu/applications/geocorr2014.html). PUMAs spanning multiple counties had their estimates apportioned across those counties based on overall 2010 Census populations. The HPS is nationally representative and includes information on U.S. residents’ intentions to receive the COVID-19 vaccine when available, as well as other sociodemographic and geographic (state, region and metropolitan statistical areas) information. The ACS is a nationally representative survey, and it provides key sociodemographic and geographic (state, region, PUMAs, county) information. We utilized data for the survey collection period May 26, 2021 – June 7, 2021, which the HPS refers to as Week 31.. PUMA COVID-19 Hesitancy Data - https://data.cdc.gov/Vaccinations/Vaccine-Hesitancy-for-COVID-19-Public-Use-Microdat/djj9-kh3p
Social Vulnerability Index for Virginia by Census Tract, 2018data.virginia.gov | Last Updated 2023-05-22T14:49:26.000Z
"ATSDR’s Geospatial Research, Analysis & Services Program (GRASP) created Centers for Disease Control and Prevention Social Vulnerability Index (CDC SVI or simply SVI, hereafter) to help public health officials and emergency response planners identify and map the communities that will most likely need support before, during, and after a hazardous event. SVI indicates the relative vulnerability of every U.S. Census tract. Census tracts are subdivisions of counties for which the Census collects statistical data. SVI ranks the tracts on 15 social factors, including unemployment, minority status, and disability, and further groups them into four related themes. Thus, each tract receives a ranking for each Census variable and for each of the four themes, as well as an overall ranking." For more see https://www.atsdr.cdc.gov/placeandhealth/svi/documentation/SVI_documentation_2018.html
NYSERDA Low- to Moderate-Income New York State Census Population Analysis Dataset: Average for 2013-2015data.ny.gov | Last Updated 2019-11-15T22:30:02.000Z
How does your organization use this dataset? What other NYSERDA or energy-related datasets would you like to see on Open NY? Let us know by emailing OpenNY@nyserda.ny.gov. The Low- to Moderate-Income (LMI) New York State (NYS) Census Population Analysis dataset is resultant from the LMI market database designed by APPRISE as part of the NYSERDA LMI Market Characterization Study (https://www.nyserda.ny.gov/lmi-tool). All data are derived from the U.S. Census Bureau’s American Community Survey (ACS) 1-year Public Use Microdata Sample (PUMS) files for 2013, 2014, and 2015. Each row in the LMI dataset is an individual record for a household that responded to the survey and each column is a variable of interest for analyzing the low- to moderate-income population. The LMI dataset includes: county/county group, households with elderly, households with children, economic development region, income groups, percent of poverty level, low- to moderate-income groups, household type, non-elderly disabled indicator, race/ethnicity, linguistic isolation, housing unit type, owner-renter status, main heating fuel type, home energy payment method, housing vintage, LMI study region, LMI population segment, mortgage indicator, time in home, head of household education level, head of household age, and household weight. The LMI NYS Census Population Analysis dataset is intended for users who want to explore the underlying data that supports the LMI Analysis Tool. The majority of those interested in LMI statistics and generating custom charts should use the interactive LMI Analysis Tool at https://www.nyserda.ny.gov/lmi-tool. This underlying LMI dataset is intended for users with experience working with survey data files and producing weighted survey estimates using statistical software packages (such as SAS, SPSS, or Stata).
Demographics For Unincorporated Areas In San Mateo Countydatahub.smcgov.org | Last Updated 2018-10-25T21:45:46.000Z
Demographics, including median income, total population, race, ethnicity, and age for unincorporated areas in San Mateo County. This data comes from the 2012 American Community Survey 5 year estimates DP03 and DP05 files. They Sky Londa area is located within two Census Tracts. The data for Sky Londa is the sum of both of those Census Tracts. Users of this data should take this into account when using data for Sky Londa.
2010 Census/ACS Basic Block Group Datadata.kcmo.org | Last Updated 2021-11-12T14:15:42.000Z
basic characteristics of people and housing for individual 2010 census block groups