- Population
The population count of Holiday, FL was 21,481 in 2018.
Population
Population Change
Above charts are based on data from the U.S. Census American Community Survey | ODN Dataset | API -
Demographics and Population Datasets Involving Holiday, FL
- API
NYCHA Resident Data Book Summary
data.cityofnewyork.us | Last Updated 2020-02-08T00:56:30.000ZContains resident demographic data at a summary level as of January 1, 2019. The Resident Data Book is compiled to serve as an information source for queries involving resident demographic as well as a source of data for internal analysis. Statistics are compiled via HUD mandated annual income reviews involving NYCHA Staff and residents. Data is then aggregated and compiled by development. Each record pertains to a single public housing development.
- API
AmeriCorps Member Race and Ethnicity National Figures
data.americorps.gov | Last Updated 2021-02-06T01:05:53.000ZThis dataset represents the percent distribution of AmeriCorps member terms which started their service in calendar year 2019 by race and ethnicity. This report excludes AmeriCorps Seniors volunteers. Included are percentage distributions from the United States Census Bureau's 2010-2019 State Population Characteristics dataset.
- API
Social Vulnerability Index for Virginia by Census Tract, 2018
data.virginia.gov | Last Updated 2023-05-22T14:49:26.000Z"ATSDR’s Geospatial Research, Analysis & Services Program (GRASP) created Centers for Disease Control and Prevention Social Vulnerability Index (CDC SVI or simply SVI, hereafter) to help public health officials and emergency response planners identify and map the communities that will most likely need support before, during, and after a hazardous event. SVI indicates the relative vulnerability of every U.S. Census tract. Census tracts are subdivisions of counties for which the Census collects statistical data. SVI ranks the tracts on 15 social factors, including unemployment, minority status, and disability, and further groups them into four related themes. Thus, each tract receives a ranking for each Census variable and for each of the four themes, as well as an overall ranking." For more see https://www.atsdr.cdc.gov/placeandhealth/svi/documentation/SVI_documentation_2018.html
- API
Bronx Zip Population and Density
bronx.lehman.cuny.edu | Last Updated 2012-10-21T14:06:17.000Z2010 Census Data on population, pop density, age and ethnicity per zip code
- API
COVID-19 Cases by Population Characteristics Over Time
data.sfgov.org | Last Updated 2023-05-29T14:02:39.000Z<strong>A. SUMMARY</strong> This dataset shows San Francisco COVID-19 cases by population characteristics and by specimen collection date. Cases are included on the date the positive test was collected. On September 12, 2021, a new case definition of COVID-19 was introduced that includes criteria for enumerating new infections after previous probable or confirmed infections (also known as reinfections). A reinfection is defined as a confirmed positive PCR lab test more than 90 days after a positive PCR or antigen test. The first reinfection case was identified on December 7, 2021. Population characteristics are subgroups, or demographic cross-sections, like age, race, or gender. The City tracks how cases have been distributed among different subgroups. This information can reveal trends and disparities among groups. Data is lagged by five days, meaning the most recent specimen collection date included is 5 days prior to today. Tests take time to process and report, so more recent data is less reliable. <strong>B. HOW THE DATASET IS CREATED</strong> Data on the population characteristics of COVID-19 cases and deaths are from: * Case interviews * Laboratories * Medical providers These multiple streams of data are merged, deduplicated, and undergo data verification processes. This data may not be immediately available for recently reported cases because of the time needed to process tests and validate cases. Daily case totals on previous days may increase or decrease. <u><a href="https://sf.gov/information/covid-19-data-questions">Learn more</a></u>. Data are continually updated to maximize completeness of information and reporting on San Francisco residents with COVID-19. Data notes on each population characteristic type is listed below. <u> Race/ethnicity</u> * We include all race/ethnicity categories that are collected for COVID-19 cases. * The population estimates for the "Other" or “Multi-racial” groups should be considered with caution. The Census definition is likely not exactly aligned with how the City collects this data. For that reason, we do not recommend calculating population rates for these groups. <u> Gender</u> * The City collects information on gender identity using <a href="https://www.sfdph.org/dph/files/PoliciesProcedures/COM5_SexGenderGuidelines.pdf">these guidelines</a>. <u> Transmission type</u> * Information on transmission of COVID-19 is based on case interviews with individuals who have a confirmed positive test. Individuals are asked if they have been in close contact with a known COVID-19 case. If they answer yes, transmission category is recorded as contact with a known case. If they report no contact with a known case, transmission category is recorded as community transmission. If the case is not interviewed or was not asked the question, they are counted as unknown. <strong>C. UPDATE PROCESS</strong> Updates automatically at 05:00 AM Pacific Time each day. Redundant runs are scheduled at 07:00 AM and 09:00 AM in case of pipeline failure. Dataset will not update on the business day following any federal holiday. <strong>D. HOW TO USE THIS DATASET</strong> Population estimates are only available for age groups and race/ethnicity categories. San Francisco population estimates for race/ethnicity and age groups can be found in a <a href="https://data.sfgov.org/d/cedd-86uf">view based on the San Francisco Population and Demographic Census dataset</a>. These population estimates are from the 2016-2020 5-year American Community Survey (ACS). This dataset includes many different types of characteristics. Filter the “Characteristic Type” column to explore a topic area. Then, the “Characteristic Group” column shows each group or category within that topic area and the number of cases on each date. New cases are the count of cases within that characteristic group where the positive tests were collected on that specific specimen collection date. Cumulative cases are the running total of
- API
Indicators of Anxiety or Depression Based on Reported Frequency of Symptoms During Last 7 Days
data.cdc.gov | Last Updated 2023-05-17T14:14:18.000ZThe U.S. Census Bureau, in collaboration with five federal agencies, launched the Household Pulse Survey to produce data on the social and economic impacts of Covid-19 on American households. The Household Pulse Survey was designed to gauge the impact of the pandemic on employment status, consumer spending, food security, housing, education disruptions, and dimensions of physical and mental wellness. The survey was designed to meet the goal of accurate and timely weekly estimates. It was conducted by an internet questionnaire, with invitations to participate sent by email and text message. The sample frame is the Census Bureau Master Address File Data. Housing units linked to one or more email addresses or cell phone numbers were randomly selected to participate, and one respondent from each housing unit was selected to respond for him or herself. Estimates are weighted to adjust for nonresponse and to match Census Bureau estimates of the population by age, gender, race and ethnicity, and educational attainment. All estimates shown meet the NCHS Data Presentation Standards for Proportions,
- API
Virginia Employment Status of the Population by Sex by Race and by Age by Year
data.virginia.gov | Last Updated 2022-12-09T15:15:31.000Z2004 to 2021 Virginia Employment Status of the Civilian Non-Institutional Population by Sex, by Race, Hispanic or Latino ethnicity, and detailed by Age, by Year. Annual averages, numbers in thousands. U.S. Bureau of Labor Statistics; Local Area Unemployment Statistics, Expanded State Employment Status Demographic Data Data accessed from the Bureau of Labor Statistics website (https://www.bls.gov/lau/ex14tables.htm) Statewide data on the demographic and economic characteristics of the labor force are published on an annual-average basis from the Current Population Survey (CPS), the sample survey of households used to calculate the U.S. unemployment rate (https://www.bls.gov/cps/home.htm). For each state and the District of Columbia, employment status data are tabulated for 67 sex, race, Hispanic or Latino ethnicity, marital status, and detailed age categories and evaluated against a minimum base, calculated to reflect an expected maximum coefficient of variation (CV) of 50 percent, to determine reliability for publication. The CPS sample was redesigned in 2014–15 to reflect the distribution of the population as of the 2010 Census. At the same time, BLS developed improved techniques for calculating minimum bases. These changes resulted in generally higher minimum bases of unemployment, leading to the publication of fewer state-demographic groups beginning in 2015. The most notable impact was on the detailed age categories, particularly the teenage and age 65 and older groups. In an effort to extend coverage, BLS introduced a version of the expanded state employment status demographic table with intermediate age categories, collapsing the seven categories historically included down to three. Ages 16–19 and 20–24 were combined into a 16–24 year-old category, ages 25–34, 35–44, and 45–54 were combined into a 25–54 year-old category, and ages 55–64 and 65 and older were combined into a 55-years-and-older category. These intermediate age data are tabulated for the total population, as well as the four race and ethnicity groups, and then are evaluated against the unemployment minimum bases. The more detailed age categories continue to be available in the main version of the expanded table, where the minimum base was met. Additional information on the uses and limitations of statewide data from the CPS can be found in the document Notes on Using Current Population Survey (https://www.bls.gov/lau/notescps.htm) Subnational Data and in Appendix B of the bulletin Geographic Profile of Employment and Unemployment (https://www.bls.gov/opub/geographic-profile/home.htm).
- API
NYSERDA Low- to Moderate-Income New York State Census Population Analysis Dataset: Average for 2013-2015
data.ny.gov | Last Updated 2019-11-15T22:30:02.000ZHow does your organization use this dataset? What other NYSERDA or energy-related datasets would you like to see on Open NY? Let us know by emailing OpenNY@nyserda.ny.gov. The Low- to Moderate-Income (LMI) New York State (NYS) Census Population Analysis dataset is resultant from the LMI market database designed by APPRISE as part of the NYSERDA LMI Market Characterization Study (https://www.nyserda.ny.gov/lmi-tool). All data are derived from the U.S. Census Bureau’s American Community Survey (ACS) 1-year Public Use Microdata Sample (PUMS) files for 2013, 2014, and 2015. Each row in the LMI dataset is an individual record for a household that responded to the survey and each column is a variable of interest for analyzing the low- to moderate-income population. The LMI dataset includes: county/county group, households with elderly, households with children, economic development region, income groups, percent of poverty level, low- to moderate-income groups, household type, non-elderly disabled indicator, race/ethnicity, linguistic isolation, housing unit type, owner-renter status, main heating fuel type, home energy payment method, housing vintage, LMI study region, LMI population segment, mortgage indicator, time in home, head of household education level, head of household age, and household weight. The LMI NYS Census Population Analysis dataset is intended for users who want to explore the underlying data that supports the LMI Analysis Tool. The majority of those interested in LMI statistics and generating custom charts should use the interactive LMI Analysis Tool at https://www.nyserda.ny.gov/lmi-tool. This underlying LMI dataset is intended for users with experience working with survey data files and producing weighted survey estimates using statistical software packages (such as SAS, SPSS, or Stata).
- API
COVID-19 Deaths by Population Characteristics Over Time
data.sfgov.org | Last Updated 2023-05-29T14:02:03.000Z<strong>A. SUMMARY</strong> This dataset shows San Francisco COVID-19 deaths by population characteristics and by date. Deaths are included on the date the individual died. Population characteristics are subgroups, or demographic cross-sections, like age, race, or gender. The City tracks how deaths have been distributed among different subgroups. This information can reveal trends and disparities among groups. Data is lagged by five days, meaning the most date included is 5 days prior to today. All data update daily as more information becomes available. <strong>B. HOW THE DATASET IS CREATED</strong> COVID-19 deaths are suspected to be associated with COVID-19. This means COVID-19 is listed as a cause of death or significant condition on the death certificate. Data on the population characteristics of COVID-19 deaths are from: * Case interviews * Laboratories * Medical providers These multiple streams of data are merged, deduplicated, and undergo data verification processes. It takes time to process this data. Because of this, data is lagged by 5 days and death totals for previous days may increase or decrease. More recent data is less reliable. Data are continually updated to maximize completeness of information and reporting on San Francisco COVID-19 deaths. Data notes on each population characteristic type is listed below. <u> Race/ethnicity</u> * We include all race/ethnicity categories that are collected for COVID-19 cases. <u>Gender</u> * The City collects information on gender identity using <u><a href="https://www.sfdph.org/dph/files/PoliciesProcedures/COM5_SexGenderGuidelines.pdf">these guidelines</a></u>. <u> Transmission type</u> * Information on transmission of COVID-19 is based on case interviews with individuals who have a confirmed positive test. Individuals are asked if they have been in close contact with a known COVID-19 case. If they answer yes, transmission category is recorded as contact with a known case. If they report no contact with a known case, transmission category is recorded as community transmission. If the case is not interviewed or was not asked the question, they are counted as unknown. <strong>C. UPDATE PROCESS</strong> Updates automatically at 05:00 AM Pacific Time each day. Redundant runs are scheduled at 07:00 AM and 09:00 AM in case of pipeline failure. Dataset will not update on the business day following any federal holiday. <strong>D. HOW TO USE THIS DATASET</strong> Population estimates are only available for age groups and race/ethnicity categories. San Francisco population estimates for race/ethnicity and age groups can be found in a <a href="https://data.sfgov.org/d/cedd-86uf">view based on the San Francisco Population and Demographic Census dataset</a>. These population estimates are from the 2016-2020 5-year American Community Survey (ACS). This dataset includes many different types of characteristics. Filter the “Characteristic Type” column to explore a topic area. Then, the “Characteristic Group” column shows each group or category within that topic area and the number of deaths on each date. New deaths are the count of deaths within that characteristic group on that specific date. Cumulative deaths are the running total of all San Francisco COVID-19 deaths in that characteristic group up to the date listed. This data may not be immediately available for more recent deaths. Data updates as more information becomes available. To explore data on the total number of deaths, use <u><a href="https://data.sfgov.org/COVID-19/COVID-19-Deaths-Over-Time/g2di-xufg">the COVID-19 Deaths Over Time dataset</a></u>. <strong>E. ARCHIVED DATA</strong> Certain population characteristics that were once included in this dataset are no longer being reported publicly. An archived copy of these data can be found at this dataset here: <a href="https://data.sfgov.org/d/w6fd-iq9e">ARCHIVED: COVID-19 Deaths by Population Characteristics Over Time</a>. The archived dataset
- API
COVID-19 Vaccinations by Town - ARCHIVE
data.ct.gov | Last Updated 2022-08-18T20:47:48.000ZNOTE: As of 4/15/2021, this dataset will no longer be updated and will be replaced by two new datasets: 1) "COVID-19 Vaccinations by Town" (https://data.ct.gov/Health-and-Human-Services/COVID-19-Vaccinations-by-Town/x7by-h8k4) and "COVID-19 Vaccinations by Town and Age Group" (https://data.ct.gov/Health-and-Human-Services/COVID-19-Vaccinations-by-Town-and-Age-Group/gngw-ukpw). A summary of COVID-19 vaccination coverage in Connecticut by town. Records without an address could not be included in town vaccine coverage estimates. Total population estimates are based on 2019 data. A person who has received one dose of any vaccine is considered to have received at least one dose. A person is considered fully vaccinated if they have received 2 doses of the Pfizer or Moderna vaccines or 1 dose of the Johnson & Johnson vaccine. The fully vaccinated are a subset of the number who have received at least one dose. The number with At Least One Dose and the number Fully Vaccinated add up to more than the total number of doses because people who received the Johnson & Johnson vaccine fit into both categories. SVI refers to the CDC's Social Vulnerability Index - a measure that combines 15 demographic variables to identify communities most vulnerable to negative health impacts from disasters and public health crises. Measures of social vulnerability include socioeconomic status, household composition, disability, race, ethnicity, language, and transportation limitations - among others. Towns with a "yes" in the "Has SVI tract >0.75" field are those that have at least one census tract that is in the top quartile of vulnerability (e.g., a high-need area). 34 towns in Connecticut have at least one census tract in the top quartile for vulnerability. All data in this report are preliminary; data for previous dates will be updated as new reports are received and data errors are corrected.