- What is the Population Rate of Change?
- What is the Percent who did not finish the 9th grade?
- What is the Median Earnings?
- What is the Number of Employees?
- What is the GDP per capita?
- What is the Annual Personal Income?
- What is the cost of living index?
- What is the High School Graduation Rate?
- What is the Median Female Earnings?
- What is the Percent Employed?
The population count of Santa Maria Metro Area (CA) was 443,738 in 2018.
Demographics and Population Datasets Involving Santa Maria Metro Area (CA)
- API data.sccgov.org | Last Updated 2023-09-30T00:03:14.000Z
The dataset provides information about the demographics and characteristics of deaths with COVID-19 by racial/ethnic groups among Santa Clara County residents. Source: California Reportable Disease Information Exchange. Data notes: The Other category for the race/ethnicity graph includes American Indian/Alaska Native and people who identify as multi-racial. This table is updated every Friday.
- API data.sccgov.org | Last Updated 2023-09-30T00:03:35.000Z
The dataset provides information about the demographics and characteristics of COVID-19 cases by racial/ethnic groups among Santa Clara County residents. Source: California Reportable Disease Information Exchange. Data notes: The Other category for the race/ethnicity graph includes American Indian/Alaska Native and people who identify as multi-racial. This table is updated every Thursday.
- API healthstat.dph.sbcounty.gov | Last Updated 2019-03-13T19:07:43.000Z
Percent of People who Cannot Afford to Feed Themselves Sufficiently. U.S. Census Bureau, Current Population Survey, December Supplement (AKA USDA Food Security Supplement). Dissected by Year, Geographic Area, Age Category, and Race/Ethnicity.
- API data.virginia.gov | Last Updated 2023-05-22T14:49:26.000Z
"ATSDR’s Geospatial Research, Analysis & Services Program (GRASP) created Centers for Disease Control and Prevention Social Vulnerability Index (CDC SVI or simply SVI, hereafter) to help public health officials and emergency response planners identify and map the communities that will most likely need support before, during, and after a hazardous event. SVI indicates the relative vulnerability of every U.S. Census tract. Census tracts are subdivisions of counties for which the Census collects statistical data. SVI ranks the tracts on 15 social factors, including unemployment, minority status, and disability, and further groups them into four related themes. Thus, each tract receives a ranking for each Census variable and for each of the four themes, as well as an overall ranking." For more see https://www.atsdr.cdc.gov/placeandhealth/svi/documentation/SVI_documentation_2018.html
- API data.cambridgema.gov | Last Updated 2023-08-01T12:47:27.000Z
This data set provides demographic and journey to work characteristics of the Cambridge Workforce by primary mode of their journey to work. Attributes include age, presence of children, racial and ethnic minority status, vehicles available, time arriving at work, time spent traveling, and annual household income. The data set originates from a special tabulation of the American Community Survey - the 2012 - 2016 version of the Census Transportation Planning Products (CTPP). The Cambridge Workforce consist of all persons who work in Cambridge, regardless of home location. For more information on Journey to Work data in Cambridge, please see the report Moving Forward: 2020 - https://www.cambridgema.gov/-/media/Files/CDD/FactsandMaps/profiles/demo_moving_forward_2020.pdf
- API data.cambridgema.gov | Last Updated 2023-08-01T12:47:57.000Z
This data set provides demographic and journey to work characteristics of the Cambridge Labor Force by primary mode of their journey to work. Attributes include age, presence of children, racial and ethnic minority status, vehicles available, time leaving home, time spent traveling, and annual household income. The data set originates from a special tabulation of the American Community Survey - the 2012 - 2016 version of the Census Transportation Planning Products (CTPP). The Cambridge Labor Force consist of all persons who live in Cambridge who work or are actively seeking employment. For more information on Journey to Work data in Cambridge, please see the report Moving Forward: 2020 - https://www.cambridgema.gov/-/media/Files/CDD/FactsandMaps/profiles/demo_moving_forward_2020.pdf
- API data.bayareametro.gov | Last Updated 2020-04-13T23:25:38.000Z
VITAL SIGNS INDICATOR Housing Permits (LU3) FULL MEASURE NAME Permitted housing units LAST UPDATED October 2019 DESCRIPTION Housing growth is measured in terms of the number of units that local jurisdictions permit throughout a given year. A permitted unit is a unit that a city or county has authorized for construction. DATA SOURCE Construction Industry Research Board Table 3: Residential Units and Valuation (1967-2010) No link available California Housing Foundation/Construction Industry Research Board California Construction Trends (2011-2013) http://www.mychf.org/cirb/ Association of Bay Area Governments (ABAG) – Metropolitan Transportation Commission (MTC) Housing Permits Database (2014-2017) http://opendata.mtc.ca.gov CONTACT INFORMATION email@example.com METHODOLOGY NOTES (across all datasets for this indicator) Bay Area housing permits data prior to 2014 comes from the California Housing Foundation/Construction Industry Research Board. Data from 2014 to 2017 comes from the Association of Bay Area Governments (ABAG) – Metropolitan Transportation Commission (MTC) Housing Permits Database. Single-family housing units include detached, semi-detached, row house and town house units. Row houses and town houses are included as single-family units when each unit is separated from the adjacent unit by an unbroken ground-to-roof party or fire wall. Condominiums are included as single-family units when they are of zero-lot-line or zero-property-line construction; when units are separated by an air space; or, when units are separated by an unbroken ground-to-roof party or fire wall. Multi-family housing includes duplexes, three-to-four-unit structures and apartment-type structures with five units or more. Multi-family also includes condominium units in structures of more than one living unit that do not meet the single-family housing definition. In the permits data from 2014 to 2017, single-family units include all units not strictly classified as multi-family. This may include secondary units. Each multi-family unit is counted separately even though they may be in the same building. Total units is the sum of single-family and multi-family units. County data is available from 1967 whereas city data is available from 1990. City data is only available for incorporated cities and towns. All permits in unincorporated cities and towns are included under their respective county’s unincorporated total. Permit data is not available for years when the city or town was not incorporated. Affordable housing is the total number of permitted units affordable to low and very low income households. Housing affordable to very low income households are households making below 50% of the area median income. Housing affordable to low income households are households making between 50% and 80% of the area median income. Housing affordable to moderate income households are households making below 80% and 120% of the area median income. Housing affordable to above moderate income households are households making above 120% of the area median income. Permit data is missing for the following cities and years: Clayton, 1990-2007 Lafayette, 1990-2007 Moraga, 1990-2007 Orinda, 1990-2007 San Ramon, 1990 Building permit data for metropolitan areas for each year is the sum of non-seasonally adjusted monthly estimates from the Building Permit Survey. The Bay Area values are the sum of the San Francisco-Oakland-Hayward MSA and the San Jose-Sunnyvale-Santa Clara MSA. The counties included in these areas are: San Francisco, Marin, Contra Costa, Alameda, San Mateo, Santa Clara, and San Benito. Permit values reflect the number of units permitted in each respective year.
- API data.kcmo.org | Last Updated 2021-11-12T14:15:42.000Z
basic characteristics of people and housing for individual 2010 census block groups
- API data.bayareametro.gov | Last Updated 2019-08-13T16:16:34.000Z
VITAL SIGNS INDICATOR Income (EC4) FULL MEASURE NAME Household income by place of residence LAST UPDATED May 2019 DESCRIPTION Income reflects the median earnings of individuals and households from employment, as well as the income distribution by quintile. Income data highlight how employees are being compensated for their work on an inflation-adjusted basis. DATA SOURCE U.S. Census Bureau: Decennial Census Count 4Pb (1970) Form STF3 (1980-1990) Form SF3a (2000) https://nhgis.org U.S. Census Bureau: American Community Survey Form B19013 (2006-2017; place of residence) http://api.census.gov Bureau of Labor Statistics: Consumer Price Index All Urban Consumers Data Table (1970-2017; specific to each metro area) http://data.bls.gov CONTACT INFORMATION firstname.lastname@example.org METHODOLOGY NOTES (across all datasets for this indicator) Income data reported in a given year reflects the income earned in the prior year (decennial Census) or in the prior 12 months (American Community Survey); note that this inconsistency has a minor effect on historical comparisons (for more information, go to: http://www.census.gov/acs/www/Downloads/methodology/ASA_nelson.pdf). American Community Survey 1-year data is used for larger geographies – metropolitan areas and counties – while smaller geographies rely upon 5-year rolling average data due to their smaller sample sizes. Quintile income for 1970-2000 is imputed from Decennial Census data using methodology from the California Department of Finance (for more information, go to: http://www.dof.ca.gov/Forecasting/Demographics/Census_Data_Center_Network/documents/How_to_Recalculate_a_Median.pdf). Bay Area income is the population weighted average of county-level income. Income has been inflated using the Consumer Price Index specific to each metro area; however, some metro areas lack metro-specific CPI data back to 1970 and therefore adjusted data is unavailable for some historical data points. Note that current MSA boundaries were used for historical comparison by identifying counties included in today’s metro areas.
- API data.sfgov.org | Last Updated 2023-09-30T15:18:02.000Z
<strong>A. SUMMARY</strong> This dataset represents the COVID-19 vaccinations given to residents of San Francisco over time. All vaccines given to SF residents are included, no matter where the vaccination took place (the vaccine may have been administered in San Francisco or outside of San Francisco). The data are broken down by multiple demographic stratifications. This dataset also includes COVID-19 vaccinations given to SF residents by the San Francisco Department of Public Health (SFDPH) over time. Data provides counts for residents who have received at least one dose, residents who have completed a primary vaccine series, residents who have received one or two monovalent (not bivalent) booster doses, and residents who have received a bivalent booster dose. A primary vaccine series is complete after an individual has received all intended doses of the initial series. There are one, two, and three dose primary vaccine series. <strong>B. HOW THE DATASET IS CREATED</strong> Information on doses administered to those who live in San Francisco is from the <a href="https://cdph.ca.gov/CAIR ">California Immunization Registry (CAIR2)</a>, run by the California Department of Public Health (CDPH). The information on individuals’ city of residence, age, race, and ethnicity are also recorded in CAIR and are self-reported at the time of vaccine administration. In order to estimate the percent of San Franciscans vaccinated, we provide the 2016-2020 American Community Survey (ACS) population estimates for each demographic group. <strong>C. UPDATE PROCESS</strong> Updated daily via automated process <strong>D. HOW TO USE THIS DATASET</strong> San Francisco population estimates for race/ethnicity and age groups can be found in a <a href=" https://data.sfgov.org/d/cedd-86uf">view based on the San Francisco Population and Demographic Census dataset</a>. These population estimates are from the 2016-2020 5-year American Community Survey (ACS). Before analysis, you must filter the dataset to the desired stratification of data using the "overall_segment" column. For example, filtering "overall_segment" to "All SF Residents by Age Bracket, Administered by All Providers" will filter the data to residents whose vaccinations were administered by any provider. You can then further segment the data and calculate percentages by Age Brackets. If you filter "overall_segment" to "All SF Residents by Race/Ethnicity, Administered by DPH Only", you will see the race/ethnicity breakdown for residents who received vaccinations from the San Francisco Department of Public Health (SFDPH). If you filter "overall_segment" to "All SF Residents by Age Group, Administered by All Providers" you will see vaccination counts of various age eligibility groups that were administered by any provider. To count the number of individuals vaccinated (with any primary series dose) for the first time on a given day, use the "new_recipients" column. To count the number of individuals who have completed their primary vaccine series on a given day, use the "new_series_completed" column. To count the number of primary series doses administered on a day (1st, 2nd, 3rd, or single doses), use the "new_primary_series_doses" column. To count the number of individuals who received their first or second monovalent (not bivalent) booster dose on a given day, use the "new_booster_recipients" and "new_2nd_booster_recipients" columns. To count the number of individuals who received their first bivalent booster dose on a given day, use the "new_bivalent_booster_recipients" column. To count the number of monovalent (not including bivalent) or bivalent booster doses administered on a given day, use the "new_booster_doses" or "new_bivalent_booster_doses" columns. To count the number of individuals who have received a vaccine up to a certain date, use the columns beginning with "cumulative_..." <strong>E. ARCHIVED DATA</strong> A previous version of this dataset